Atharva Poly-Plast Ltd (544812)
சுருக்கம்
நிகழ்வுகள்
- சமீபத்திய முடிவுகள்
- Q2 FY27, தாக்கல் செய்யப்பட்டது 3 நவ. 2026
- இயக்குநர் குழுக் கூட்ட அறிவிப்பு
- 27 ஆக. 2026
பங்குச் சந்தைத் தரவு. ஒவ்வொரு எண்ணும் அதன் சொந்தப் பக்கம் காட்டும் வடிவத்திலேயே; தேதிகள் தரவின் தேதிகள். தகவலுக்கு மட்டுமே, முதலீட்டு ஆலோசனை அல்ல.
📈 பங்கு விலை & நிகழ்வுகள்
Q2 FY27 முடிவுகள்
Atharva Poly-Plast Ltd reported Q2 FY27 results on 3 Nov 2026: revenue ₹36.7 Cr, and net profit ₹4.4 Cr; the operating margin was 15.6%.
| Q2 FY27 (₹ கோடி) | மதிப்பு | YoY | QoQ |
|---|---|---|---|
| வருவாய் | ₹36.7 | — | — |
| செயல்பாட்டு லாபம் | ₹5.7 | — | — |
| நிகர லாபம் | ₹4.4 | — | — |
| EPS (₹) | 3.03 | — | — |
| செயல்பாட்டு லாப வரம்பு | 15.6% | — | — |
- வரிக்கு முந்தைய லாபத்தில் 31% மற்ற வருமானம் மற்றும் ஒருமுறை கிடைத்த வருமானங்களிலிருந்து வந்தது.
லாபத்தின் தரம்: வரிக்கு முந்தைய ₹5.7 கோடி லாபத்தில், ₹3.9 கோடி (69%) முக்கிய வணிகத்திலிருந்து வந்தது; மீதம் பிற வருமானம் மற்றும் ஒருமுறை வரவுகளிலிருந்து வந்தது.
📢 சமீபத்திய கார்ப்பரேட் அறிவிப்புகள்
Atharva Poly-Plast released its H1 FY27 earnings call transcript following its listing on the BSE SME platform. Revenue from operations increased 77.5% YoY to ₹36.69 crore compared to ₹20.67 crore in H1 FY26, driven by premium office furniture and engineering verticals. EBITDA rose to ₹7.45 crore with a 20.3% margin, while PAT grew to ₹4.38 crore from ₹1.75 crore. Post-IPO capitalization increased net worth to ₹46.06 crore and brought the debt-to-equity ratio down to 0.1x.
- H1 FY27 revenue grew 77.5% YoY to ₹36.69 crore from ₹20.67 crore in H1 FY26
- EBITDA reached ₹7.45 crore with an EBITDA margin of 20.3%, compared to 11.5% in H2 FY26
- Net profit (PAT) surged to ₹4.38 crore from ₹1.75 crore in H1 FY26
- Net worth rose to ₹46.06 crore as of September 2026, while debt-to-equity dropped to 0.1x
- Plant utilization stands at approximately 67%, leaving room for incremental volume growth
Atharva Poly-Plast reported a 77.5% YoY increase in H1 FY27 revenue from operations to ₹36.69 Cr compared to ₹20.67 Cr in H1 FY26, in its first half-yearly results since listing in July 2026. EBITDA rose 1% YoY to ₹7.45 Cr, but EBITDA margins contracted by 15.4 percentage points YoY to 20.3% due to raw material costs rising to ~75% of revenue. Sequentially vs H2 FY26, PAT rebounded by 150.3% to ₹4.38 Cr from ₹1.75 Cr. Following its ₹27 Cr IPO, the company's net worth increased to ₹46.06 Cr and debt-to-equity declined sharply from 0.50x to 0.10x.
- H1 FY27 revenue grew 77.5% YoY to ₹36.69 Cr from ₹20.67 Cr in H1 FY26
- EBITDA margin stood at 20.3%, recovering sequentially by 8.8 pp from H2 FY26 (11.5%) but down from 35.7% in H1 FY26
- Profit after tax stood at ₹4.38 Cr, declining 7.1% YoY but surging 150.3% HoH
- Post-IPO debt-to-equity ratio fell from 0.50x to 0.10x as borrowings dropped 53%
- Capacity utilisation stood at 67% in H1 FY27 vs 78% in FY26, leaving roughly one-third of capacity available
Atharva Poly-Plast Ltd submitted its half-yearly disclosure of related party transactions for the period ended September 30, 2026, pursuant to SEBI LODR Regulation 23(9). Key transactions included finished goods sales worth Rs 153.75 lakh to Prasad Meditech (India) LLP and Rs 31.01 lakh to Prasad Meditech, both entities under common control of KMP. The company also reported closing balances of short-term borrowings from KMP and relatives, including Rs 36.58 lakh from MD Anujit Shivaji Darade and Rs 18.80 lakh from Sadhana Shivaji Darade.
- Sales of finished goods to Prasad Meditech (India) LLP approved/transacted at Rs 153.75 lakh for H1 FY27
- Sales of finished goods to Prasad Meditech amounted to Rs 31.01 lakh, with closing dues of Rs 145.87 lakh
- Remuneration of Rs 12.00 lakh approved for Managing Director Anujit Shivaji Darade
- Short-term borrowings outstanding from MD Anujit Shivaji Darade stood at Rs 36.58 lakh as of September 30, 2026
- Short-term borrowings from relatives of KMP include Rs 18.80 lakh (Sadhana Darade) and Rs 14.70 lakh (Smita Darade)
Atharva Poly-Plast Limited approved its unaudited financial results for the half year ended September 30, 2026. Alongside the results, the board reviewed the utilization of IPO proceeds and auditor certificates on working capital usage. The company also disclosed half-yearly related-party transactions, including finished goods sales of ₹153.75 lakh to Prasad Meditech (India) LLP and ₹31.01 lakh to Prasad Meditech.
- Board approved unaudited financial results for the half year ended September 30, 2026
- Sales of finished goods to Prasad Meditech (India) LLP totaled ₹153.75 lakh during the period
- Sales of finished goods to Prasad Meditech amounted to ₹31.01 lakh with closing receivables of ₹145.87 lakh
- Short-term borrowings from KMP Mr. Anujit Shivaji Darade stood at ₹36.58 lakh as of September 30, 2026
- Meeting commenced at 4:00 p.m. and concluded at 4:45 p.m. on November 2, 2026
Atharva Poly-Plast responded to an exchange email dated September 28, 2026, concerning non-compliance with Regulation 33 of SEBI LODR for the period ended March 31, 2026. The exchange noted that results were submitted via XBRL but missing in PDF mode. The company clarified that statements were previously uploaded in August 2026 and has now re-submitted the PDF results along with the Auditor's Report carrying an unmodified opinion. The filing is procedural and rectifies a technical documentation discrepancy.
- Clarification submitted in response to BSE email dated September 28, 2026
- Company re-submitted PDF format of standalone financial results for the period ended March 31, 2026
- Audited statements were initially uploaded on August 5, 2026, and revised on August 12, 2026
- Statutory auditor PRASS & Associates LLP issued an unmodified audit opinion
- Company listed on BSE SME platform with effect from July 7, 2026
Atharva Poly-Plast Ltd has informed BSE that a meeting of its Board of Directors is scheduled for Tuesday, September 1, 2026. The board will consider and approve the convening of the 13th Annual General Meeting (AGM) through video conferencing along with the AGM notice. Additionally, the board will consider appointing Internal Auditors and granting authorization under Regulation 30(5) of SEBI LODR. This is a routine administrative filing with no immediate financial impact.
- Board meeting scheduled for Tuesday, September 1, 2026 at 3:00 PM
- Meeting convened to finalize details and notice for the 13th Annual General Meeting (AGM)
- Board to consider and approve appointment of Internal Auditors
- Approval of authorization of Key Managerial Personnel under Regulation 30(5) of SEBI LODR on the agenda
Atharva Poly-Plast reported a steady 14.4% YoY revenue growth to Rs 54.39 Cr for the fiscal year ended March 31, 2026. Net profit outpaced revenue growth, rising 27.5% to Rs 6.47 Cr, resulting in an improved EPS of Rs 5.24. While the company successfully listed on the BSE SME platform in July 2026, the audited FY26 financials show a significant 172% surge in trade receivables to Rs 11.73 Cr, which warrants close monitoring of working capital cycles.
- Revenue from operations grew to Rs 54.39 Cr in FY26 from Rs 47.54 Cr in FY25.
- Net Profit increased to Rs 6.47 Cr, representing a 27.5% YoY growth.
- Trade receivables jumped significantly to Rs 11.73 Cr from Rs 4.30 Cr in the previous year.
- Total Property, Plant, and Equipment (PPE) additions for the year stood at Rs 3.70 Cr.
- The company maintained a stable debt-to-equity ratio of approximately 0.50 with total debt at Rs 9.76 Cr.
Atharva Poly-Plast reported a steady performance for FY26, with revenue from operations growing 14.4% YoY to ₹54.39 Cr. Net profit increased by 27.5% to ₹6.47 Cr, resulting in an EPS of ₹5.24 compared to ₹4.11 in the previous year. However, the company faced significant working capital pressure as trade receivables surged 172% to ₹11.73 Cr, causing net cash from operating activities to drop sharply to ₹1.73 Cr from ₹6.98 Cr in FY25. The balance sheet expanded with total assets reaching ₹43.79 Cr, supported by an increase in share capital to ₹12.35 Cr.
- Revenue from operations increased to ₹54.39 Cr in FY26 from ₹47.54 Cr in FY25.
- Net Profit (PAT) rose 27.5% YoY to ₹6.47 Cr from ₹5.07 Cr.
- Trade receivables spiked significantly to ₹11.73 Cr from ₹4.30 Cr in the previous year.
- Net cash from operating activities declined to ₹1.73 Cr, down from ₹6.98 Cr in FY25.
- Finance costs increased by 29.7% to ₹1.35 Cr, reflecting higher borrowing requirements.
Atharva Poly-Plast Ltd has scheduled a board meeting for August 5, 2026, to consider and approve the standalone audited financial results for the fiscal year ended March 31, 2026. This is a mandatory regulatory filing under SEBI (LODR) Regulations. The meeting is scheduled to commence at 4:00 PM IST. Investors should look for the full-year performance data and any potential dividend announcements that may arise during the session.
- Board meeting scheduled for August 5, 2026
- Agenda includes approval of standalone audited financial results for the year ended March 31, 2026
- Meeting is set to start at 4:00 PM IST
- Intimation made pursuant to Regulation 29 of SEBI (LODR) Regulations, 2015
நிறுவனச் சுயவிவரம்
நிதிச் செயல்திறன்
இந்த நிறுவனத்துக்கான நிதிப் பகுப்பாய்வுத் தரவு இன்னும் கிடைக்கவில்லை.
செயல்பாட்டு உந்துசக்திகள்
இந்த நிறுவனத்திற்கான செயல்பாட்டுப் பகுப்பாய்வுத் தரவு இன்னும் கிடைக்கவில்லை.
வியூக வளர்ச்சி
இந்த நிறுவனத்துக்கான வியூக வளர்ச்சிப் பகுப்பாய்வு இன்னும் கிடைக்கவில்லை.
வெளிப்புறக் காரணிகள்
இந்த நிறுவனத்துக்கு வெளிப்புறக் காரணிகளின் பகுப்பாய்வு இன்னும் கிடைக்கவில்லை.
ஒழுங்குமுறை & நிர்வாகம்
இந்த நிறுவனத்திற்கான ஒழுங்குமுறைப் பகுப்பாய்வு இன்னும் கிடைக்கவில்லை.
அபாயப் பகுப்பாய்வு
இந்நிறுவனத்துக்கான அபாய பகுப்பாய்வு இன்னும் கிடைக்கவில்லை.
