📈 நேரலை சந்தை கண்காணிப்பு

NSE மற்றும் BSE-யின் ஒவ்வொரு கார்ப்பரேட் அறிவிப்பும், AI-யால் சில நிமிடங்களில் படிக்கப்பட்டு விளக்கப்படுகிறது — தாக்கம், முக்கிய புள்ளிவிவரங்கள், குறுகிய/நீண்டகாலப் பார்வை, கவனிக்க வேண்டியவை.

நேரலை சமீபத்திய அறிவிப்பு: 6 நாட்களுக்கு முன் இன்று 0 பகுப்பாய்வு செய்யப்பட்டது
பின்தொடர்Telegram
0
இன்று
168,672
இதுவரை பகுப்பாய்வு செய்யப்பட்டவை
49,863
நேர்மறை
8,485
எதிர்மறை
100,530
நடுநிலை
9,726
கண்காணி
குறிப்பு: இவை NSE பொது அறிக்கைகளின் AI-உருவாக்கிய, கல்வி நோக்கச் சுருக்கங்கள் — ஒவ்வொரு ஆவணத்தையும் ஆதாரமாகக் கொண்டவை, ஆனால் முதலீட்டு ஆலோசனை அல்ல, மேலும் முழுமையற்றதாகவும் இருக்கலாம். அசல் அறிக்கையுடன் சரிபார்க்கவும், செயல்படுவதற்கு முன் SEBI-பதிவு பெற்ற முதலீட்டு ஆலோசகரை அணுகவும்.
அழி
4 அறிவிப்புகள் பொருந்தும் தாக்கம் 5+ Symbol: 505681
நடுநிலை தாக்கம் 5/10 நிதி முடிவுகள்

Q2 FY27 Results: Bimetal Bearings Reports Standalone Revenue Up 31.4% YoY to ₹88.20 Cr, PAT at ₹2.37 Cr

Bimetal Bearings reported standalone revenue from operations of ₹88.20 Cr for Q2 FY27 (quarter ended Sep 30, 2026), marking a 31.4% YoY growth compared to ₹67.14 Cr in Q2 FY26. However, standalone Profit After Tax (PAT) declined 4.5% YoY to ₹2.37 Cr from ₹2.48 Cr in the corresponding quarter last year, reflecting margin compression due to higher raw material and other operational expenses. For the six-month period ended Sep 30, 2026, standalone revenue stood at ₹167.73 Cr with a PAT of ₹5.61 Cr. The statutory auditors Fraser & Ross LLP issued an unmodified review report on both standalone and consolidated financials.

நடுநிலை தாக்கம் 6/10 நிதி முடிவுகள்

Rs 79.53 Cr Revenue: Bimetal Bearings Reports 11% YoY Revenue Growth in Q1 FY27

Bimetal Bearings reported a consolidated revenue of Rs 79.53 Cr for the quarter ended June 30, 2026, a 10.98% increase over the Rs 71.66 Cr reported in the same quarter last year. Consolidated Profit After Tax (PAT) stood at Rs 3.94 Cr, down 7% YoY from Rs 4.24 Cr, primarily due to a significant rise in material costs which reached Rs 53.86 Cr. The core Engine Bearings segment remains the dominant revenue driver, contributing Rs 74.34 Cr. Total comprehensive income was bolstered to Rs 7.87 Cr by a Rs 4.60 Cr gain in the valuation of equity instruments.

நடுநிலை தாக்கம் 5/10 வழக்கமானது

Bimetal Bearings Approves Rs 13.50 Dividend; Reports 14.5% Revenue Growth at 65th AGM

Bimetal Bearings Limited concluded its 65th Annual General Meeting, where shareholders approved a 135% dividend (Rs 13.50 per share) totaling Rs 5.16 Cr. The company reported a 14.54% top-line growth for FY26, driven by new customer acquisitions and existing program expansions. The powder segment showed strong performance with 17% growth, and the company is currently in the trial production phase for its EV battery section. Additionally, a material related party transaction limit of Rs 50 Cr was approved for dealings with JV partner BBL Daido.

நடுநிலை தாக்கம் 5/10 டிவிடெண்ட்

₹13.50 Dividend Approved; Shareholders Clear Material RPT with BBL Daido

Bimetal Bearings held its 65th AGM on July 20, 2026, where shareholders approved all five resolutions, including a final dividend of ₹13.50 per share. This dividend represents a total payout of approximately ₹5.16 crore, which is about 43% of the TTM PAT of ₹12 crore. Shareholders also granted prior approval for material related-party transactions with BBL Daido Private Limited, a critical joint venture partner. The company maintains a strong promoter holding of 74.87% and a low debt-to-equity ratio of 0.02.

📊 கடந்த 7 நாட்கள் — உணர்வு அடிப்படையில் பகுப்பாய்வு செய்யப்பட்ட அறிவிப்புகள்

நேர்மறைஎதிர்மறைநடுநிலைகவனம்
⚠️ இந்தத் தளம் எவ்வாறு உருவாக்கப்படுகிறது: சந்தைத் தரவுப் பக்கங்கள் NSE/BSE வெளியீடுகள் மற்றும் நிறுவனங்களின் தாக்கல்களிலிருந்து தானாகக் கணக்கிடப்படுகின்றன; செய்திக் கட்டுரைகளும் அறிவிப்புப் பகுப்பாய்வுகளும் AI உதவியுடன் எழுதப்படுகின்றன, மனித மேற்பார்வையுடன்: AI உருவாக்குவதை எங்கள் ஆசிரியர்கள் மதிப்பாய்வு செய்கின்றனர். இரண்டிலும் பிழைகள் இருக்கலாம். எந்தவொரு முதலீட்டு முடிவுக்கு முன்பும் அசல் மூலங்களில் சரிபார்க்கவும். முதலீட்டு ஆலோசனை அல்ல; Flash Finance SEBI-பதிவு பெற்றது அல்ல. நாங்கள் AI-ஐ எவ்வாறு பயன்படுத்துகிறோம்